Roll Line Speed Max Abec 9 Bearings
The Roll-Line Speed Max Professional Bearings are specifically designed and manufactured for very High Level Competitive Roller Skating of all types.
The Roll-Line Speed Max is a copy of the original Snyder Super Fafnir Bearings which sold for $160.00 per set in 1982 when they were released.
The Roll-Line Speed Max bearings carry all of the hallmarks and performance of the original Bearings, with a couple of upgrades that were not available in 1982.
We consider the Speed Max to be the Best Skating Bearings available at any cost.
The Roll Line Speed Max Professional Bearings are Free Rolling with minimal Radial Play which promotes and very evenly distributes the load across the 8 balls
for optimal Roll and a good amount of Axial Play or Thrust, which is the side movement of the inner race in relation to the outer race.
This movement is very important because when Skaters push, we always put side load on the skate to get power in the push or stroke.
If the Bearing does not allow for this, it will bind and Loose operating speed or Roll.
These provisions in the Race Curvature and Contact Angle allow the Roll-Line Speed Max Bearings to Roll very freely.
The Roll-Line Speed Max have a single metal Shield to help keep the dust and dirt out.
The Speed Max has a high performance Ball Crown Cage is Carbon impregnated to provide a little extra dry lubrication to ensure these Bearings
will perform far beyond most other Bearings.
The Roll-Line Speed Max Bearings are available for Skates with 7mm.
The resiliency and strength of Bearings with 8 Steel Balls provide better performance for much less cost than other bearings on the market.
Many World level Skaters and Champions in Artistic and Quad Ball Hockey have been using the Speed Max for many years.