Roll Line Variant M Plate:
Advice for optimal Position adjustment
Since the Variant M frame is a product constructed exclusively
for professional use, it guarantees the best performance only
when correctly adjusted.
An optimal position is achieved by carefully
choosing the most Appropriate suspensions in relation to the type of skating
and the weight of the athlete.
CHART OF THE SUSPENSION HARDNESSES
Rubber suspension hardness
Green soft - up to 35 kg
Brown Medium - up to 50 kg
Yellow Hard - >50 kg
CLICK ACTION ADJUSTMENT
Turn the action adjustment nut with the 17 mm wrench in the clockwise direction to make the action more rigid, or in the
counter clockwise direction to make it softer.
It is important to check that the pivot is well inserted
into the pivot bush while exerting slight pressure.
Adjustment Nut locking screw is only a safe screw, remove it
only when you change the suspensions.
PIVOT ADJUSTMENT
Loosen the pivot locking screw with a 13 mm wrench.
Screw the pivot on or off with a 6 mm wrench until this is
well inserted into the pivot bush while exerting slight pressure.
Retighten the pivot locking screw.
CONTROL AND MAINTENANCE
We recommend that you check the status of the various
components every time this product is used. In particular, carefully check
the following:
- that the plate is well fastened to the boot;
- that the bolts are well fastened to the plate of the
skate;
- the wear and tear status of the suspensions;
- that the pivot is well inserted into the pivot bush with
slight pressure;
- the wear and tear status of the wheels and the
self-locking nuts for fastening the wheels;
- the optimal gliding of the bearings;
- the wear and tear status, correct position, proper closure
and the cleanliness of the toe stop feature.
