EDEA Sizing Chart:
Skaters often choose boots by matching their standard shoe size with what they believe is the equivalent size in skates.
Unfortunately these two sizing systems do not always correspond exactly, because each manufacturer has its own measuring type, and also because standard shoes, which require the foot to bend, are usually longer than skates.
For these reasons we recommend that you always choose the size of your boots based on a real measurement, the length of the foot, matching this to the inner length of the boot.
For purely illustrative purposes only, below we have provided a table comparing sizes in MILLIMETERS to the different scales of sizes relative to standard shoes.
DRAWING ROUND YOUR FOOT.
Sit down and place one "A4" sheet under each foot.The leg (the part of the lower limb that lies between the knee and the ankle) must be perpendicular to the floor without any inclination.Ask another person to help you by tracing the outline of your feet using a ballpoint pen that must be kept close to the foot and in an upright position.Without moving your feet, stand up and repeat the operation. This drawing should be larger than the first one as it shows the outline of the foot under pressure.Then, with a ruler, draw a line on each sheet between the extreme points of tip and heel.
Using the ruler, measure this distance precisely in centimeters.
This is the size of your feet.
If you are used to wearing close-fitting shoes, we recommend that you try this size on.
It is common to leave a small space at the tip, to facilitate the movement of the toes.
Note: when using this method, the thickness of the pen tip could add up to 5 mm to the actual length of the foot.
The Edea Anatomic preformed insole, specifically designed for the EDEA boots.
Made of special EVA material that adapts to the weight and pressure of the foot, absorbing shocks and vibrations and maintaining the foot temperature constant with the ventilation system.